We've moved to ToddlersandTools.com
Saturday, July 5, 2014
Thursday, July 3, 2014
Using a Caulk Gun
If
you’ve never used a caulk gun, there are a few things to know. The plunger is engaged and disengaged by
simply turning the hooked portion at the back.
On most models there is a cutter. The cutter is to trim the tip of the tube of caulk. When doing so make sure to trim at a good angle and an appropriate sized hole for the project. At the front of most caulk guns there is a wire that swivels out. This is to punch holes in the seal at the top of the tube of caulk. Simply punch it, firmly, several times down the spout.
On most models there is a cutter. The cutter is to trim the tip of the tube of caulk. When doing so make sure to trim at a good angle and an appropriate sized hole for the project. At the front of most caulk guns there is a wire that swivels out. This is to punch holes in the seal at the top of the tube of caulk. Simply punch it, firmly, several times down the spout.
Subscribe to:
Comments (Atom)